100Ah AGM
These batteries have the ability to be discharged in any orientation and a special assembly technology is used to enhance power density. Epoxy terminal seals resist electrode creepage through terminals and low internal resistance allows discharge currents of over ten times the rated current of the battery.Therefore, a relatively small battery may be specified in applications requiring high peak currents. Unique technical processes are used in the grid alloy and electrolyte additives so that the battery can be re-charged easily to a normal level even after being over-discharged. This range of batteries can be easily transported due to the leak proof construction.
Dimensions & Weight General Features
Length 330mm x Width 171mm x Height 214mm
Total height 220mm Approx weight 32kg/70.5lbs
Terminal type F5
12V 100Ah (20hr)
Absorbed Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding.
Complies with IATA/ICAO Special provision A67
UL-recognized component
Can be mounted in any orientation
Computer designed lead,calcium tin alloy grid for high power density.
Long service life, float or cyclic applications.
Low self discharge.
High efficiency and charge acceptance, ideal for use with Solar applications. Completely sealed, leak proof and maintenance free
Battery Construction
Component - raw material
Posotive plate - Lead dioxide
Negative plate - Lead
Container and cover - ABS
Safety valve - Rubber
Terminal - Copper
Separator - Fibreglass
Electrolyte - Sulphuric acid
Standards
JIS,DIN,BS and IEC
